GENERAL DETAILS
The fiber to ethernet converter can convert Optical-Electric Ethernet signals between 1000M UTP interface (TX) and 1000M optical fiber interface (FX). 6 Group LED indicated lights could fully monitor the working conditions of converters.It is easy for users to observe and diagnose the failure of converters. GT Series Gigabit Converters could be used alone; but Converter Card should be inserted to 16 slots RACK which is suitable for the use of Network Centre.
| SKU: | PMT08003000006 |
Product Features
- The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
- Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
- UTP port supports MDI / MDI-X auto crossover.
- Supporting low control
- Supporting 1552 bytes packet
- Extend fiber distance up to 2km for multi-mode fiber and 20-120km for single-mode fiber
- Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
- Supports link fault pass through function
- Design of internal or external power supply for selection by end-users
Download Brochure
Product Specification
| Data Buffer | 128Kb RAM |
| Connector | UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps |
| Conversion mode | Medium conversion |
| Ambient temperature | 0~+50°C |
| Storage temperature | -20 ~ +70°C |
| Humidity | 5% ~ 90% |