GENERAL DETAILS
This Fiber PDTI Pedestal with Subscriber Distribution Box is capable for expresses, tap-out, and branch application. The
capacity is for 3 pcs optical cable access, drop cable outlet and 2 pcs of PLC splitter accommodated inside. The splice tray is for
fiber management and separating the space for inlet and outlet fibers. This product is designed for indoor or outdoor
environment.
Product Features
Installation Steps
1 Open the box with the key.
2 Strip the outer sheath of the cable (and shield also if it is armored cable) and remove water blocking tape and wrappings until
loose protection tubes is exposed.
3 Clean all cable grease from loose tubes with cable cleaner.
4 Cut and discard all solid filler tubes and remove central strength members to around 60mm from sheath opening
5 Insert main fiber cable and secured it with the cable tie. Secured the fiber strength member to the strength member
relief clamp provided in the box and tighten it.
6 Bring the cable to the splice part.
7 This box can be used either to split the signal or splice and patch direct to the main cable. It suitable to house
splitter or adapters.
8 Patch the pigtail to the adapter or input splitter and slack the cable around the
cable management and bring it to the splice part at the back of the swing.
9 Splice the main cable to the pigtail as per company practice
10 Pre-insert optical drop cable to outlet holes, then seal and secure the drop
cable by cable gland and cable strength relief. Slack the cable around the cable
management
11 Pre-installed field assembly connector to the drop cable, then patch it to
the pigtail or output splitter.
Download Brochure
